IDK MSD-72 Series Command Reference Manual Download

Page: 67 / 113

MSD-72 series Command Guide

3.3.10 EDID

@GED / @SED

EDID

Getting

Command

@GED

Response

@GED, edid_1, edid_2, edid_3, edid_4, edid_5, edid_6, edid_7, edid_8, edid_9

Setting

Command

@SED, ch_1, edid_1 (, ch_2, edid_2

･･･

)

Response

@SED, ch_1, edid_1 (, ch_2, edid_2

･･･

)

Parameter

edid_1-9: EDID

0 = Built-in EDID [Default],

1 = OUT1 MONITOR,

2 = OUT2 MONITOR,

3 = OUT3 MONITOR,

4 = OUT4 MONITOR,

101 to 108 = COPY DATA 1 to COPY DATA 8

ch_1-9: Input channel

0 = All digital inputs, 1 = IN1 to 9 = IN9

Getting

example

Command

Response

@GED

@GED,0,0,0,3,0,0,0,0,0

Description Getting the set EDID.

IN4: EDID of the sink device that is connected to OUT3.

Other inputs: built-in EDID

Setting

example

Command

Response

@SED,2,3

Description Setting IN2: EDID that is read from the sink device connected to OUT3.

Remarks

These commands are only for digital input.

IN8 and IN9: If

“0” (Analog signal) is selected for “

@GIN / @SIN

”, “-1” is acquired

and the setting cannot be valid. In order to use a copied data, read EDID data

from the sink device in

“

@RME

” in advance.

Summary of Contents for MSD-72 Series


















































































































Search results

Summary of Contents for MSD-72 Series

Reviews:

Related manuals for MSD-72 Series

Brands by name

Popular brands

IDK MSD-72 Series, Command Reference Manual

Search results

Summary of Contents for MSD-72 Series

Reviews:

Related manuals for MSD-72 Series

Brands by name

Popular brands