IDK MSD-72 Series Command Reference Manual Download

Page: 95 / 113

MSD-72 series Command Guide

@SCV / @SEV

Saving crosspoint memory (Setting video channel)

Setting

Description Overwriting all

Command

@SCV, memory (, name)

Response

@SCV, memory (, name)

Setting

Description Overwriting partly

Command

@SEV, memory (, name)

Response

@SEV, memory (, name)

Parameter

memory: Crosspoint memory

1 to 9

name: Memory name

Up to 10 characters using 20 to 7D from ASCII codes.

If you do not specify memory name, only settings of crosspoint are saved

without changing the memory name.

Setting

example

Command

Response

@SCV,2

Description Saving the current video channel in crosspoint memory 2 without changing

memory name.

Setting

example

Command

Response

@SEV,2,PATTERN2

Description Saving the current video channel in crosspoint memory 2 with the name of

“PATTERN2”. Output settings that are set to Not Controlled are not saved.

Remarks

－

@GCV / @ECV

Editing crosspoint memory (Setting video channel)

Getting

Command

@GCV, memory

Response

@GCV, memory, v_1, v_2, v_3, v_4, name

Setting

Command

@ECV, memory, v_1, v_2, v_3, v_4

Response

@ECV, memory, v_1, v_2, v_3, v_4

Parameter

memory: Crosspoint memory

1 to 9

v_1-4: Video channel

-1 = Not controlled [Default], 0 = OFF, 1 = IN1 to 9 = IN9

name: Memory name

Up to 10 characters using 20 to 7D from ASCII codes. [Default] 20 (space)

Getting

example

Command

Response

@GCV,2

@GCV,2,3,1,1,1,PATTERN2

Description Getting video channel of crosspoint memory 2.

OUT1: IN3, Other 2: IN1 are saved with the name of

“PATTERN2”.

Setting

example

Command

Response

@ECV,2,1,1,-1,-1

Description When crosspoint memory 2 is loaded, OUT1 and OUT2 are set to IN1 and OUT3

and OUT4 are set to Not controlled.

Remarks

Nothing is saved in the memory by factory default, the state is

“-1” (Not

controlled). If you save only audio (@SCA) at the first saving of crosspoint

settings,

“-1” (Not controlled) is returned to unsaved audio and video.

Summary of Contents for MSD-72 Series


















































































































Search results

Summary of Contents for MSD-72 Series

Reviews:

Related manuals for MSD-72 Series

Brands by name

Popular brands

IDK MSD-72 Series, Command Reference Manual

Search results

Summary of Contents for MSD-72 Series

Reviews:

Related manuals for MSD-72 Series

Brands by name

Popular brands