MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
99
@GCA / @ECA
Editing crosspoint memory (Setting audio channel)
Getting
Command
@GCA, memory
Response
@GCA, memory, a_1, a_2, name
Setting
Command
@ECA, memory, a_1, a_2
Response
@ECA, memory, a_1, a_2
Parameter
memory: Crosspoint memory
1 to 9
a_1-2: Audio channel
-1 = Not controlled [Default], 0 = OFF, 1 = IN1 to 8 = IN8
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
[Default] 20 (space)
Getting
example
Command
Response
@GCA,2
@GCA,2,3,1,PATTERN2
Description Getting audio channel of crosspoint memory 2.
OUT1: IN3, OUT2: IN1 are saved with the name of “PATTERN2”
Setting
example
Command
Response
@ECA,2,1,2
@ECA,2,1,2
Description When crosspoint memory 2 is loaded, outputs are set as follows:
OUT1: IN1, OUT2: IN2
Remarks
Nothing is saved in the memory by factory default, the state is “-1” (Not
controlled). If you save only video (@SCV) at the first saving of crosspoint
settings, “-1” (Not controlled) is returned to unsaved audio and video.
@RPM
Loading all settings
Setting
Command
@RPM, preset
Response
@RPM, preset
Parameter
preset: Preset memory
1 to 8
Setting
example
Command
Response
@RPM,3
@RPM,3
Description Loading preset memory 3.
Remarks
Once preset memory is loaded, all settings of video and audio I/O except for
some environmental settings will be updated.
