IDK MSD-701UHD, Command Reference Manual

Page: 47 / 115

MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
47
@GIS / @SIS Automatic measurement of start position
Getting Command @GIS
Response @GIS, mode_1, mode_2
Setting Command @SIS, ch, mode
Response @SIS, ch, mode
Parameter mode_1-2 / mode: Automatic measurement
0 = All inputs from this input channel are not measured automatically.
1 = Current input signal is not measured automatically.
2 = Current input signal is measured automatically. [Default]
ch: Input channel
0 =All analog inputs, 6 = IN6, 7 = IN7
Getting
example
Command
Response
@GIS
@GIS,0,2
Description Getting the setting of Automatic measurement of the start position.
IN6: not measured automatically, IN7: measured automatically.
Setting
example
Command
Response
@SIS,6,1
@SIS,6,1
Description Setting signal that is currently input from IN6 to “1” (Current input signal is not
measured automatically).
Remarks These commands are only for analog input.
IN6 and IN7 are available only if “0” (Analog signal) is selected for “ @GIN / @SIN
Signal selection of DVI input connector ”. If “1” (Digital signal) is selected, “-1” is
returned.
@GSM / @SSM Automatic measurement when unregistered signal is input
Getting Command @GSM
Response @GSM, mode
Setting Command @SSM, mode
Response @SSM, mode
Parameter mode: Automatic measurement
0 = Not execute, 1 = Execute [Default]
Getting
example
Command
Response
@GSM
@GSM,1
Description Getting the set automatic measurement mode when unregistered signal is input.
Automatic measurement is set to “1” (Execute).
Setting
example
Command
Response
@SSM,1
@SSM,1
Description Setting the automatic measurement to be executed when unregistered signal is
input.
Remarks
－