IDK FDX-12UHD User Manual Download

Page: 71 / 80

FDX-12UHD User’s Guide

8.9.11 Viewing system status

Menu Top

→

OTHERS

→

HEALTH CHECK

You can view the following status.

If “HEALTH CHECK” is set to the top page, the information is always displayed. However, if the alarm function

is also set to ON, the alarm function gets the priority to display the status.

【

See: 8.9.4 Alarm

】

[HEALTH CHECK]
OK

[HEALTH CHECK]
MAIN IN OUT FAN TEMP

①

②

③

④

⑤

[Fig. 8.16] Viewing system status (Left: Normal; Right: Abnormal)

[Table 8.8] Viewing system status (When problem occurs)

Note:

In case any error status is displayed, the FDX may have problems. Please contact us.

Description

①

Displayed if a problem occurs in the power-supply voltage of the FDX.

②

Displayed if a problem occurs in the power-supply voltage of input slot

board.

③

Displayed if a problem occurs in the power-supply voltage of output slot

board.

④

Displayed if a problem occurs in a cooling fan.

⑤

Displayed if a problem occurs in the internal temperature.

Summary of Contents for FDX-12UHD

















































































Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands

IDK FDX-12UHD, User Manual

Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands