FDX-12UHD User’s Guide
39
8.2 Input setting
8.2.1 No-signal input monitoring time
Menu Top
→
INPUT SETTING
→
INPUT VIDEO DETECT
Setting for Each input connector (ALL, IN1 to IN12)
Setting value OFF : OFF
3Sec to 15Sec : 3 to 15 seconds [Default] 10 sec.
If you change the EDID settings of the FDX or power the FDX off/on, the source device may not output a
video signal. Use this menu to set the monitoring time which is from when a source device stops outputting
signal to when the FDX requests the source device to output video signal.
[Fig. 8.1] Monitoring time
Notes:
・
If you are using the monitor power-saving or dual monitor features on your PC, set this feature to “OFF”.
This will avoid unpredictable operation.
・
When using this feature, ensure that the “monitoring time” is set for a value greater than the amount of time
needed for the source to provide an output signal.
・
Channels that do not have an input slot board cannot be selected in this menu.
[Fig. 8.2] Repeating output signal setting
Changing EDID
ON
OFF
FDX requests the source
device to output video signals
Monitoring time
Hot plug
ON
OFF
Video signals
from source
device
Changing EDID
Monitoring
time
ON
OFF
Monitoring
time
Monitoring
time
Video output timing of source device
Video signals
from source
device
FDX requests source device to output
video signals
