IDK FDX-12UHD User Manual Download

Page: 51 / 80

FDX-12UHD User’s Guide

8.5.6 Linear PCM Audio

Menu Top

→

EDID

→

EDID LINEAR PCM

Setting for

Each input connector (IN1 to IN12)

Setting value

32kHz : 32 kHz

44.1kHz : 44.1 kHz

48kHz : 48 kHz [Default]

88.2kHz : 88.2 kHz

96kHz

: 96 kHz

192kHz : 192 kHz

You can set the maximum sampling frequency of PCM audio that is output from the source device

The setting will be applied only if the EDID resolution is set to one of “05” to “46”.

【

See: 8.5.1 EDID resolution

】

Notes:

・

Some LC monitors do not support some audio formats. Select the audio format and sampling frequency that

are supported by the device. 0^

・

Ensure to press the “MENU/SET” key to apply the setting.

・

Channels that do not have an input slot board cannot be selected in this menu.

8.5.7 AC-3 Dolby Digital Audio

Menu Top

→

EDID

→

EDID AC-3/Dolby D

Setting for

Each input connector (IN1 to IN12)

Setting value

OFF : OFF [Default]

32kHz : 32 kHz

44.1kHz : 44.1 kHz

48kHz : 48 kHz

You can set the maximum sampling frequency of AC-3 Dolby Digital Audio that is output from the source

device.

The setting will be applied only if the EDID resolution is set to one of “05” to “46”.

【

See: 8.5.1 EDID resolution

】

Notes:

・

Some LC monitors do not support some audio formats. Select the audio format and sampling frequency that

are supported by the device.

・

Ensure to press the “MENU/SET” key to apply the setting.

・

Channels that do not have an input slot board cannot be selected in this menu.

Summary of Contents for FDX-12UHD

















































































Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands

IDK FDX-12UHD, User Manual

Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands