IDK FDX-12UHD User Manual Download

Page: 64 / 80

FDX-12UHD User’s Guide

+5V (4.5V

～

5.5V)

8.9.4 Alarm

Menu Top

→

OTHERS

→

ALARM

Setting value

ON [Default]

OFF

Rated voltage: 24 V

Rated current: 300 mA

[Fig. 8.10] Alarm output circuit

If a problem occurs in power voltage, I/O slot board, cooling fan, or internal temperature, the relay

will be closed and the contact between A and B will be set to ON.

The following ALARM page appears and the backlight blinks only if the top page is displayed.

【

See: 8.9.8 Viewing slot board status

】

【

See: 8.9.9 Viewing cooling fan status

】

【

See: 8.9.10 Viewing power-supply voltage

】

[Fig. 8.11] Alarm page

[Table 8.5] Alarm page

Note:

In case the alarm is displayed, the FDX may have problems. Please contact us.

Description

①

Displayed if a problem occurs in the power-supply voltage.

②

Displayed if a problem occurs in the power-supply voltage of an input slot board.

③

Displayed if a problem occurs in the power-supply voltage of an output slot board.

④

Displayed if a problem occurs in cooling fans.

⑤

Displayed if a problem occurs in internal temperature.

ALARM
MAIN IN OUT FAN TEMP

①

②

③

④

⑤

Summary of Contents for FDX-12UHD

















































































Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands

IDK FDX-12UHD, User Manual

Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands