FDX-12UHD User’s Guide
60
8.8.3 Editing cross point
Menu Top
→
PRESET MEMORY
→
EDIT CROSS POINT
Setting value
The first page:
01 to 32 : Preset memory number 1 to 32 *
[xxxxxxxxxx] : Preset memory name (up to 10 characters in ASCII)
The second page: (moving to the second page using
and
keys)
OUT1 to OUT12 : Selecting output channel
V: ---, 1 to 12, OFF : Selecting input channel of the FDX [Default] “---“
A: ---, 1 to 12, OFF : Setting input channel of the MAU-1616 (optional) [Default] “---“
* If output slot boards are not mounted, output channel information will not be displayed. If input slot boards
are not mounted, you cannot set those channels.
Editing preset memory setting:
If it is set to not controlling channels, “---” is displayed. When preset memory is loaded an output that is set to
“---” (not controlled) will not be switched.
All preset memories are set to “---” (not controlled) by default.
Output channel 1 = Input channel 1
Output channel 2 = Input channel 2
Output channel 3 = Input channel 3
Output channel 4 = Input channel 4
…
Output channel 11 = Input channel 11
Output channel 12 = Input channel 12
Current I/O channel status
Output channel 1 = Input channel 3
Output channel 2 = Not control (---)
Output channel 3 = Input channel 1
Output channel 4 = Not control (---)
…
Output channel 11 = Input channel 9
Output channel 12 = Not control
Current settings of preset memory 1
Load
I/O channel status after
loading preset memory
Output channel 1 = Input channel 3
Output channel 2 = Input channel 2
Output channel 3 = Input channel 1
Output channel 4 = Input channel 4
…
Output channel 11 = Input channel 9
Output channel 12 = Input channel 12
Settings is not changed
[Fig. 8.8] Loading edited preset memory
Notes:
・
Ensure to press the “MENU/SET” key to apply the setting.
・
Do not power off the FDX while “Saving” is displayed, otherwise the setting information may be lost.
