20
72-910-24 Revision H
Factory Reset Function
From the Factory Reset Function screen you can force the controller to reset all of its internal
parameter to the factory default values.
Use this function to reset the controller back to the factory defaults.
Be absolutely certain you want to reset all the parameters back to the factory defaults. Once
the reset takes place there is no way to retrieve the previous parameters.
Settings Menu
From the Settings menu you access the conductivity, and chemical feed timer parameter sections.
Blowdown
– Set the conductivity set point, Blowdown timer sample mode, differential, probe
calibration, alarms, and 4-20ma output parameters.
Timers 1 to 4
– Set the Chemical feed timer modes.
Home Screen
Blowdown
Timer 1
Timer 2
Timer 3
Timer 4
Back | Select
Settings
Home Screen
Configure
Factory Rst
Factory Reset
Are you sure!
Cancel | OK
To RESET
Enter 9999
0000
Cancel | OK
