15
72-910-24 Revision H
This screen shows the real-time data relating to the controller. This screen can be used to log
the amount of time a particular output was energized since it was last reset. Below is a
description of each of the data fields:
Bdn–
The amount of time, in hours, the blowdown output was energized since it was last reset.
Tmr 1 –
The amount of time, in hours, the timer 1 output was energized since it was last reset.
Tmr 2 –
The amount of time, in hours, the timer 2 output was energized since it was last reset.
Tmr 3 –
The amount of time, in hours, the timer 3 output was energized since it was last reset.
Tmr 4–
The amount of time, in hours, the alarm output (or timer 4 if programmed) output was
energized since it was last reset.
Last Error –
Shows the most recent error that was displayed on the controller.
Pressing the reset key will cause the hour timers to reset to zero.
Configure Menu
From the Configure menu you can select many different system configuration options.
Date/Time
– Set the current date, date format, time, and time format.
Date/Time
– Set the current date, date format, time, and time format.
HOA Outputs
– Manually control the five relays.
Inputs
– Set the input type, drum level, or water meter type and volume.
Gal/Lit
– Set the display in Gallons or liters.
Scrolling
– Set the time between each timer’s status scrolling speed on the home screen.
Totalizers
- View the water meter totalizer values since the last user reset.
Contrast
– Set the display contrast.
Password
– Set the user password.
Troubleshoot
– View the signal inputs in real-time to diagnose wiring problems.
Display Dampener
– Set the display and control update period.
Software Version
– Displays the current software version.
Factory Restore
– Restore the parameters to factory default.
Home Screen
Date/Time
HOA Outputs
Inputs
Gal/Lit
Scrolling
Totalizers
Contrast
Password
Troubleshoot
Disp Damp
Software Ver
Factory Rst
Back | Select
Configure
