MorphoWave
TM
OEM
– Installation guide
Section 3 : Installation Procedure
2015_2000009096 V6
January 2019
IDEMIA
D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
61
Figure 41: Direct Point to Point Ethernet Connection
1.
Connect terminal directly to PC with Point to Point Ethernet connection.
2.
Change the Host PC IP address to 192.168.1.11 (or any IP address within
192.168.x.x range excluding 192.168.1.10)
3.
Connect terminal with its default IP address i.e. 192.168.1.10 either from MBTB
or Webserver.
4.
Change the Terminal network parameter from MBTB or Webserver.
NOTE: For connecting terminal directly to a PC (Point to Point connection) by an
Ethernet cable, the Ethernet port of the PC must support the Auto-MDIX feature,
otherwise a crossover Ethernet cable is mandatory. If no crossover Ethernet cable
is available, then a dedicated switch can be used for the connection.
Recommendations for RJ45 wiring
Pin
1
2
3
4
5
6
7
8
Signals
Data
pair 1
Data
pair 1
Data
pair 2
NC/POE pin
dedicated (+)
NC/POE pin
dedicated (+)
Data
pair 2
Ground/ pin
dedicated (-)
NC/POE pin
dedicated (-)
EIA / TIA T568B
Colors
White
orange
Orange
White
green
Blue
White blue
Green White brown
Brown
EIA / TIA T568A
Colors
White
green
White
green
White
green
White green
White green
White
green
White green White green
Corel L120 Colors
Grey
White
Pink
Orange
Yellow
Blue
Purple
Brown
