MorphoWave
TM
OEM
– Installation guide
Section 3 :Installation Procedure
38
IDEMIA
D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
2015_2000009096 V6
January 2019
Step by step procedure
Figure 8: Face camera viewing angle
The recommended height for fixing of the terminal is 1.40m (camera height).
For an optimal use the terminal must be installed in an area where the
lighting conditions are controlled. Avoid direct exposure of the sensor to
the sun light and ensure good ambient lighting for face detection if used.
For face detection, the user has to face the product.
Power supply from electrical source shall be switched off before starting
the installation.
The strength of the attachment depends on the solidity of the wall on
which the terminal is mounted.
To ensure water tightness, the wall plate has to be sealed with a silicone
bead (refer to corresponding picture for process).
