MorphoWave
TM
OEM
– Installation guide
Section 1 :Introduction
20
IDEMIA
D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
2015_2000009096 V6
January 2019
To secure properly an access, IDEMIA recommends installing the MorphoWave
TM
OEM
terminal as a part of the typical Access Control environment, described in the figure
below.
Figure 1: Implementation Recommendations
This environment comprises:
The MorphoWave
TM
OEM terminal itself
Its role is to perform one-to-many biometric identification or one-to-one biometric
verification, i.e. to identify the individual who is presenting his hand on the terminal
sensor by comparing his biometric data with the references previously stored in the
terminal database (in the form of biometric templates).
An Access Controller (3rd party product)
The Controller is the element which controls the access rights of the individuals to the
secured area. For that reason, it must be located in the secured area.
The individuals who are authorized to access the secured area have their User ID listed
in a so-called "White List" (in contrast with a black list).
The MorphoWave
TM
OEM terminal and the Controller are communicating according to
one of the TCP/IP, Wiegand, Dataclock or RS485 protocols:
