23
Mar 2016
MSC-18K
5. STORE THE MOBILE COLUMN LIFT
After all the work has been done on the vehicle, lower down all the lifting forks.
When one of the lifting columns touches the ground, release the DOWN button for 2
seconds. Then press the DOWN button again to lower all the lifting forks to ground.
Then turn off the power switches to middle position (OFF).
Using the pallet jack mechanism, move the lifting column out of the vehicle wheel.
Position them at the storage place.
5.1 CHARGING BATTERIES
After one day’s operation or the battery indicator shows the voltage is low, it is
suggested to charge the batteries. Different batteries need different charging time.
Please refer to the specification of the battery provided by its manufacturer.
a) Move the columns near the AC power supply ports on the wall.
b) Connect the charger cable to the AC power supply. (Fig. 12)
c) Turn the power switch to the right position (CHARGE) on each column.
d) While charging, the CHARGING indicator 1# will be lighted. After the batteries
are fully charged (about 10 hours), the indicator will be Re
Battery Charger Socket Switch Charger Indicator
Fig. 12
Summary of Contents for MSC-18K-B
Page 5: ...4 Mar 2016 MSC 18K 1 2 DIMENSIONS mm inch Fig 1 Mobile Column Lift Dimensions...
Page 34: ...33 Mar 2016 MSC 18K MSC 18K B EXPLODED VIEWS PARTS LISTS MSC 18K Column Assembly...
Page 39: ...38 Mar 2016 MSC 18K MSC 18K Control Panel Assembly...
Page 41: ...40 Mar 2016 MSC 18K MSC 18K Power Unit Assembly...
