41
12) Using the mouse, select a file to be downloaded and left-click on the download button.
13) The software will bring up the file box, giving the user the opportunity to change the file name or
choose the file location.
14) To save the file without any changes, left-click on the save button.
15) To change the name, highlight the file name and type in a new file name.
16) To change the file location, left-click on the down arrow next to the save in: selection box. This brings
up a drop-down menu with the entire file directory of your computer.
17) Double-left-click on the appropriate file location and left-click on the save button.
18) The software will then download the directory to your computer. This may take a few minutes,
depending on the size of the file.
19) Repeat this process until all available files have been downloaded onto the computer.
If problems exists during the download process, check the following:
1) The cables used to connect the power supply/RS-232 interface to the analyzer and computer are the
cables supplied with the power analyzer.
2) The power supply/RS-232 interface has been connected to a properly grounded receptacle.
3) No other devices are on the comm. Port.
4) If the device is a laptop computer, check that the infrared port has been disabled.
5) The analyzer is not in run mode.
6) The file directory of the analyzer has programs to download.
7) The analyzer is not in the programming menu. You must be in the display screens to download data.
If problems persist, please contact our Technical Hotline at 877-201-9005 for assistance.