29
5.2.5 Password
Password is the section of the menu to customize the password to protect the analyzer from unauthorized
access.
If you change the password, and forget the change, you will have to consult the factory
for assistance in retrieving the new password.
To change the password:
1) Use the up
[
5
]
and down
[
6
]
arrow buttons to highlight
PASSWORD
and press the enter
[ENTER]
button. This brings up the password selection box.
2) The analyzer will prompt the user for the old password.
3) The password is 4 buttons pressed in sequence. The default password is left arrow
[
3
]
,
set
[SET]
,
up arrow
[
5
]
, set
[SET]
.
4) If the password is entered incorrectly, the analyzer will display an error message “Incorrect old
password” and return the user to the setup menu.
5) After the password is entered correctly, the analyzer will prompt the user for the new password.
6) The password is 4 buttons pressed in sequence. Press any 4 buttons (except for the on and off
buttons) to be used as the new password.
7) The analyzer will prompt the user to confirm the new password.
8) If the password is entered incorrectly, the analyzer will display an error message “Incorrect check
password” and return the user to the setup menu.
9) If the new password is confirmed, the analyzer will return to the setup menu, and the new password
will be saved.
To return to the main programming menu, press either the left arrow
[
3
]
or escape
[ESC]
button.
5.2.6 Recall
Recall is the section of the menu to return the analyzer to the factory default settings.
To restore factory default settings:
1) Use the up
[
5
]
and down
[
6
]
arrow buttons to highlight
RECALL
and press the enter
[ENTER]
button. This brings up the recall setting box.
2) The analyzer will prompt the user to set the settings back to the factory standard.
3) Use the left
[
3
]
and right
[
4
]
arrow buttons to choose either yes or no, and press enter.
4) If
YES
was selected, the user will be returned to the setup menu, and all settings will be returned to
the factory default settings.
5) If
NO
was selected, the user will be returned to the setup menu without changes.
Note: The password will not be changed back to the factory default by using recall.
To return to the main programming menu, press either the left arrow
[
3
]
or escape
[ESC]
button.
