19
4.5 Setup
screen
In the setup screen, the key recording parameters are displayed to let the user know how the analyzer
has been setup for data collection. Additional information on these recording parameters is located in the
programming menu.
The following information is displayed on this screen:
•
Measurement type: This determines what information will be displayed in the table view screen, and
what measurements may be taken during data collection. See section 5.2.1 for more information.
•
Voltage ratio: This ratio may be changed in the event a voltage transformer is used. See section
5.2.1 for more information.
•
Clamp adapter ratio: These are the values of the phase current clamp adapters and the neutral
current clamp adapter. See section 5.2.1 for more information.
•
File name: This is the name of the file that us being used for data recording. See section 5.2.2 for
more information.
•
File extension: For the model 806 analyzer, this will always be a standard file extension
[.STD]
.
•
Period: This is the user-selected recording period for data collection. See section 5.2.2 for more
information.
•
Harmonics: This is the level of harmonics that is being recorded by the analyzer for data collection.
See section 5.2.2 for more information.
•
Memory type: This lets the user know if the analyzer has been set for a linear recording, or a cyclical
recording where data is overwritten when the memory is full. See section 5.2.2 for more information.
•
Available recording time: The analyzer will automatically calculate how much recording time is
available based on the available memory, number of recording parameters selected and the
recording period.
•
Trigger parameter: This is the measurement parameter selected to trigger recording by the analyzer.
See section 5.2.2 for more information.
•
Maximum and minimum trigger values: If a trigger parameter has been set, these are the maximum
and minimum value points that will trigger data collection. See section 5.2.2 for more information.
•
Trigger date/time on and date/time off: If a trigger date/time has been set, this is the date/time that
data collection will begin and end. See section 5.2.2 for more information.
•
Communication parameters: This is the communication protocol that has been established for
downloading data to the computer. If a trigger parameter has been set, these are the maximum and
minimum value points that will trigger data collection. See section 5.2.3 for more information.
Press the escape
[ESC]
button from the setup screen to move to the table view screen.
