37
To make a measurement with the power analyzer:
1) Connect the power supply to the power analyzer and to a properly grounded outlet using the factory
supplied cables. (Section 3.3)
2) Insert the voltage leads into the analyzer, and match the color-coded current transformers with the
leads to help simplify the connection process. Insert the current transformer leads into the proper
input connectors on the Model 806. (Section 2.2)
3) Connect the voltage leads and current clamp adapters to the electrical system as shown in the
following sections. (Sections 6.1.1 – 6.1.5)
4) Turn the instrument on and select the harmonics program. (Section 3.1)
5) Verify that the voltage and current ratios are correct on the setup screen (Section 4.5)
6) Begin taking measurements
6.1.1 3-phase 4-wire connection diagram
6.1.2 3-phase 3-wire connection diagram
