Ideal AKE CALEO COLD, Translation Of The Original Operating Manual, Page: 70 / 70

Subject to technical changes | Valid as of January 2022
70
DECLARATION OF CONFORMITY
CALEO COLD/NEUTRAL
05
5. Declaration of conformity according to MRL 2006/42/EC
EU Declaration of conformity
in accordance with EU guidelines 2006/42/EC and 2014/30/EC
Manufacturer AKE Ausseer Kälte- und Edelstahltechnik GmbH
Pichl 66, 8984 Bad Mitterndorf, ÖSTERREICH
Product Self-service display case
Type Caleo Cold (60; 80; 120; 142)
Caleo Neural (60; 80; 120; 142)
Caleo Neutral Plus (60; 80; 120; 142)
Caleo Air Tower 142
Year of construction
as of 2021
Compliance of the products given above with Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU is hereby con-
firmed. The essential requirements from MA-RL 2006/42/EC and the essential requirements from EMC-RL 2014/30/EU; RoHS
2011/65/EU and Ecodesign Regulation (EU) 2019/2024 have been complied with. The required technical documents were prepa-
red and archived.
The following harmonised standards for Machinery Directive 2006/42/EU were applied in their currently valid version:
EN 60335-1:2012
Safety of electronic devices for home use and similar purposes – Part 1: General requirements EN 60335-1:2012 + AC:2014 +
A11:2014 + A13:2017
(IEC 60335-1:2010, modified)
EN 60335-2-89:2010
Safety of electronic devices for home use and similar purposes – Part 2-89: Special requirements for commercial freezers and re-
frigerators with an integrated or separate condensing unit or motor compressor
EN 60335-2-89:2010 + A1:2016 + A2:2017 (IEC 60335-2-89:2010)
EN 378-2:2016
Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking
and documentation
EN ISO 12100:2010-11
Safety of machinery - General principles for design – risk assessment and risk reduction (ISO 12100:2010);
In the event of technical changes to the product given above, which are not agreed on with the manufacturer, this EG declaration
of conformity loses its validity.
Bad Mitterndorf, 2021 Andreas Pilz (CTO)
Please observe possible supplementary sheets to this operating manual and the related declaration of conformity.
Contact the manufacturer for more information.
NOTE
Authorised representative for technical documentation