manualshive.com logo in svg

Ideal AKE CALEO COLD, Translation Of The Original Operating Manual, Page: 11 / 70

Share
Download
Ideal AKE CALEO COLD Translation Of The Original Operating Manual Download Page 11

Subject to technical changes  | Valid as of January 2022    

11

CALEO COLD/NEUTRAL 

1.6.  Used symbols and signal words

Imminent danger to the life of persons

Safety information with the DANGER signal word indicates imminent danger to the life and health of persons. Failure to 
observe these safety instructions can lead to death or serious damage.

DANGER

Danger of personal injury (serious injuries) and possibly property damage as well

Safety information with the WARNING signal word indicates a dangerous situation that can have an impact on the health 
of persons. Failure to observe these safety instructions can lead to serious injuries.

WARNING

Danger of personal injury (minor injuries) and possibly property damage as well

Safety information with the CAUTION signal word indicates a possibly dangerous situation. Failure to observe these safety 
instructions can lead to minor or slight injuries..

CAUTION

This symbol with the comment NOTE refers to supporting 

information for installation, operation or alternatively mainte-

nance and repair. Failure to observe this information can lead to property damage.

NOTE

Summary of Contents for CALEO COLD







































































Reviews:

No comments