Ideal AKE CALEO COLD, Translation Of The Original Operating Manual, Page: 33 / 70

Subject to technical changes | Valid as of January 2022
33
CALEO COLD/NEUTRAL
When making a row of Caleo units, they must be screwed together. Use the blind rivet nuts designated for that purpose ac-
cording to Chapter 2.1. Connection of the units in the base. Check the hold of the connection.
It is necessary for the base to be level in order to enable the condensate to drain off. Test whether the water on the inside of
the well can also drain.
NOTE
NOTE
Preparation
You need the following for the installation the unit:
• at least two persons
• Tools:
- adjustable wrench or pipe wrench (for units with a pedestal)
- spirit level
The installation personnel are responsible for the stability or alternatively support of the unit. Make sure the installation site is pre-
pared in accordance with the technical specifications. Protect the surfaces of the unit and the base against any damage during the
installation.
All work, installations, deliveries and services may only be carried out by authorised refrigeration companies and qualified specialists.
Electrical installations may only be carried out by an authorised specialist. You must ensure that suitable personnel and tools are
available to prevent damage and injuries..
Danger of the unit tipping on an uneven and unstable subsurface Achten Sie darauf, das Gerät ausschließlich auf ebenen
Make sure that the unit is installed exclusively on a level and adequately stable subsurface. The unit could tip over, parts
could fall or open unintentionally.
Support the unit exclusively on the four height-adjustable feet
To prevent the unit from tipping, it must be supported on the four height-adjustable feet. The castors are exclusively for
moving it when it is empty.
WARNING
WARNING