Ideal AKE CALEO COLD, Translation Of The Original Operating Manual, Page: 32 / 70

Subject to technical changes | Valid as of January 2022
32
TECHNOLOGY
CALEO COLD/NEUTRAL
02
2.5. Assembly and Installation guide
2.5.1. First steps
In this chapter, you are given important Information on the assembly and use of the units.
Check whether the unit has any transport damage and write down the damage that you discover on the transfer papers from the
freight forwarder as well as on your form. Have the damage confirmed.
Delivery acceptance
To make damage that is caused during loading, transport and unloading traceable, all units are equipped with
“Shockwatch ® 2”. This tool makes it possible to determine at which point of the delivery chain a product is damaged in order
to clarify transport damage. Information on the ShockWatch ® concept is stored in the QR code (see Chapter 4.2).
NOTE
All requirements placed on the installation site according to Chapter 1.9 must be followed in order to ensure efficient and safe
operation.
Your claim to compensation for the damage is lost if you do not report transport damage in good time (according to GTCs).
Avoid placing the unit near any equipment that produces a lot of steam. This can lead to heavy icing of the evaporator and
condensate on the glass and other performance-reducing as well as unwanted adverse effects.
Correct installation and trouble-free operation are requirements for putting the unit into operation. The installation must
comply with the local electrical, safety and hygiene regulations.
NOTE
NOTE
NOTE
If the damage is only discovered after unpacking, then you are required to report it immediately in writing. It is advisable to notify your
supplier by phone in advance. You need the following to remove the transport packaging:
• at least two persons
• Tools:
- cordless screwdriver or Philips screwdriver
- cutting tool (scissors or knife)
Set-up