Ideal AKE CALEO COLD, Translation Of The Original Operating Manual, Page: 18 / 70

Subject to technical changes | Valid as of January 2022
18
GENERAL INFORMATION AND SAFETY
CALEO COLD/NEUTRAL
01
1.14. Residual dangers
Even with maximum care during the design and construction of the units and taking into consideration all safety-relevant circumstan-
ces, there can still be residual dangers that were evaluated by means of a risk assessment. All the residual risks and safety instructions
from the risk assessment are listed in this chapter.
Ignition danger from electric sparks or sparks caused by friction, and from hot surfaces
With refrigerant R290, an explosive gas/air mix can be created as a consequence of possible leaks in the refrigeration system.
The sparks from a vacuum cleaner or other electric device may unintentionally ignite this mixture. No hot surfaces may be pre-
sent or created. Only use devices for cleaning, maintenance and service work that comply with the applicable ATEX directive.
WARNING
Danger of crushing when installing the units
When installing the units, pay attention to the danger of crushing, also for third parties. Wear protective gloves and safety
shoes for installation and loading work.
WARNING
Electrical hazard
Make sure that the mains connection of the unit is not damaged. In the event of damage, it must be replaced by the distributor
or its customer service to avoid hazards.
Danger of the unit tipping on an uneven and unstable subsurface
Make sure that the unit is installed exclusively on a level and adequately stable subsurface. Otherwise the unit could tip, or
parts of the unit could fall off, or parts of the unit could open.
Danger of crushing as well as danger from falling objects when handling/aligning/positioning heavy individual components
When handling heavy objects, be aware of possible crushing dangers, also for other persons. If possible, use both hands
when you handle heavy objects. Get another person to help you if necessary. When handling/aligning/positioning heavy
individual components, protective gloves and safety shoes must be worn.
WARNING
WARNING
WARNING