Ideal AKE CALEO COLD, Translation Of The Original Operating Manual, Page: 13 / 70

Subject to technical changes | Valid as of January 2022
13
CALEO COLD/NEUTRAL
1.8. General safety instructions
Generally, the following safety provisions and obligations apply when working with the unit:
• Covers with warning signs may only be opened by authorised specialists.
• The units must not be cleaned with a water jet.
• The protective covers of the equipment may not be removed; otherwise there is a risk of injury.
• The controller may only be opened by an authorised specialist.
• Air flows around the unit from improperly installed fans (e.g. air-conditioners) or draughts must be avoided in
order to ensure perfect operation of the unit.
• The ambient temperature must not 25 °C, and the relative ambient humidity must not permanently
exceed 60%.
• The unit is not suitable for operation in entrance and outdoor areas.
• The unit must be protected against sunlight.
• The products brought for presentation must be pre-cooled and put in with a core temperature of the desired
temperature class or colder.
• Sharp objects must not be kept loosely in the unit; otherwise there is a risk of injury.
• All glass enclosures must be treated with the necessary care in order to prevent injuries from the glass breaking.
• Components and service fluids may only be replaced with original parts.
• Do not store any combustible or explosive products in the unit or close to it.
• All live parts must be adequately covered so that no contact is possible during operation.
• The installation environment must have a stable design in order to withstand the strains of everyday operation.
• It must not be possible to remove any coverings that are mounted during the installation without tools.
• After cleaning, the unit must be checked for loose connections, shearing points and damage. Remedy any defi-
ciencies that are discovered immediately.
• Do not use the unit for any non-designated purposes.
• When topping up refrigerant, only the refrigerant given on the identification plate (rating plate) may be used.
• Topping up may only be performed by authorised specialists. The filling quantity given on the rating plate must
be followed.
• The unit must be installed away from heat sources in a low-dust and well-ventilated environment.
• The units may only be pushed or moved on the mounted transport rollers (depending on the model) or the unit is
lifted and moved using suitable lifting equipment.
Technical modifications to the unit may only be carried out by authorised specialists. This applies in particular to work on the
refrigeration system, electrical installation and mechanics.
Any change must be authorised by your supplier or the manufacturer.
NOTE
The unit must not be operated in the immediate vicinity of devices that generate heat or steam. This can result in compressor
damage, the formation of condensate on the glass, temperature control problems in the cooling area and the like.
NOTE