Ideal AKE CALEO COLD, Translation Of The Original Operating Manual, Page: 44 / 70

Subject to technical changes | Valid as of January 2022
44
OPERATION AND USAGE
CALEO COLD/NEUTRAL
03
3.2.2. Temperature setting
The interior temperature is regulated via the display of the electronic temperature controller. It is located on the control box. The factory
set target value can be shown by pressing the SET button. The temperature that you desire can be set by holding the SET button and
simultaneously pressing the UP button for a higher temperature or alternatively the DOWN button for a lower temperature. You can
find the exact button assignment in Chapter 3.2.
After changing the temperature settings, it takes some time for the desired temperature to be reached in the unit and stabilise (check
the set temperature with a suitable test thermometer). The temperature should be set by the supplier or specialist dealer during the
installation. Observe the ambient conditions when choosing the inside temperature. A large temperature difference between the
inside and outside temperature combined with high air humidity can lead to heavy ice formation and condensate. This reduces the
refrigeration capacity and prevents the automatic defrosting from working properly.
The factory set target value can be shown by pressing the SET button. This is set according to the unit. An adjustment is
only permissible by an authorised specialist.
NOTE
The temperature has been factory set for each unit according to specified technical requirements to ensure optimal food
storage. This temperature setting can be changed according to the food brought in, in order to prevent an accumulation of
food waste due to incorrect setting of the cooling temperature.
Changes to the temperature setting may lead to spoilage of the goods brought in.
CAUTION