Id Quantique SWISS QUANTUM+ Time Controller Series, User Manual, Page: 7 / 92

Share

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
70 pages after

Page: 7 / 92

Id Quantique SWISS QUANTUM+ Time Controller Series User Manual Download Page 7

Time Controller Series User Manual

Section 1: About this manual

ID QUANTIQUE SA

1227 Geneva

T +41 22 301 83 71

[email protected]

7

Rue Eugène-Marziano 25

Switzerland

F +41 22 301 83 79

www.idquantique.com

1

About this manual

1.1

Message to the user

Congratulations on having purchased this ID Quantique measurement apparatus. The Time
Controller Series integrates the long and renowned experience that ID Quantique has developed
with single-

photon systems and applications since the company’s inception.

To get the most out of this equipment, we recommend that you read this manual carefully. This
manual provides information about the equipment principle of operation as well the following
guidance:

•

How to safely install a Time Controller Series device

•

How to prepare a Time Controller for time correlation measurements

•

How to install and use the Time Controller software

•

How to begin integrating the Time Controller into your

lab’s software environment

1.2

Getting support

Support for ID Quantique instrumentation is provided directly by ID Quantique SA and ID Quantique-
authorized and trained technical personnel. To get support, contact ID Quantique by one of the
following channels.

•

E-mail:

[email protected]

•

Phone: +41 22 301 83 71 (Monday to Friday, from 9 am to 5 pm GMT+1)

•

Check our website for more information on ID Quantique locations:

https://www.idquantique.com/about-idq/contact-us/

To facilitate the user support, be ready to provide the model and version of the Time Controller
Series device you are using. In case of bugs please write down the error message and the situation in
which it has occurred as well as the software version.

«
...
5
6
7
8
9
...
»

Summary of Contents for SWISS QUANTUM+ Time Controller Series





























































































Reviews:

No comments