© 2007 ICS, Blount Inc.
F/N 518537 Oct 07
TITLE
603GC SERVICE MANUAL
78
D Plug one end of the main fuel
pick-up tube.
E Re-pressurize the tube to
7 psi (0.5 bar).
F Replace the tube if pressure is
not maintained.
G If the main fuel pick-up tube does
maintain pressure, then the leak has
been isolated to the carburetor.
Refer to the Walbro Diaphragm
Carburetor Service Manual.
25.3 The fuel tank breather stabilizes the
pressure in the fuel tank preventing
both excessive pressure, which
could flood the engine, and negative
pressure, which could starve the
engine of fuel.
25.4 Fuel tank breather is located inside
the air filter compartment.
25.5 Testing the fuel tank breather.
A Attach the pressure gauge and bulb
to the fuel tank breather. Pressurize
the tube to 7 psi (0.4 bar).
B The pressure should reduce to nearly
0 psi (0 bar) over about 3 seconds.
25. FUEL SYSTEM LEAKS
Summary of Contents for 603GC
Page 1: ...F N 518537 Oct 07 2007 ICS Blount Inc 603GC SERVICE MANUAL...
Page 2: ......
Page 84: ......
Page 85: ......