F/N 518537 Oct 07
© 2007 ICS, Blount Inc.
TITLE
603GC SERVICE MANUAL
35
10. CYLINDER COVER
10
This section covers the
disassembly and assembly of
the cylinder cover. Removal of
the air intake components and
front handle is necessary. Refer
to sections 5 and 17 if needed.
10.1 Remove the air filter mount screws.
NOTE:
May require heat to
remove screws.
10.2 Remove the cylinder cover screws (3).
10.3 Remove spark plug boot from cylinder
cover taking care not to pry or
damage the wire.
10.4 Remove fuel tank breather cap
and clamp.
10.5 Partially remove intake manifold
from cylinder cover.
10.6 Remove cylinder cover.
A Pull up on front.
B Push intake manifold through hole.
C Make sure throttle linkage is
disengaged from cylinder cover.
D Guide fuel breather tube and
compensator tube through
cylinder cover.
Summary of Contents for 603GC
Page 1: ...F N 518537 Oct 07 2007 ICS Blount Inc 603GC SERVICE MANUAL...
Page 2: ......
Page 84: ......
Page 85: ......