© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
21
Unpacking & Assembly
GUIDEBAR AND DIAMOND CHAIN
INSTALLATION & TENSIONING
STEP 4
Install bar over chain tensioning pin. Place
bar clamp plate through bar slot into bar pad.
Verify bar and tensioning pin are adjusted
fully back toward drive sprocket. Be sure
to wear gloves as rails of guidebar can be
extremely sharp. Install bar clamp bolts so
bar clamp plate is loosely held in place.
STEP 5
Install the chain around the drive sprocket,
insert into top bar groove and then around
the nose sprocket.
