© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
28
E
N
G
LI
S
H
PRECUT CHECKLIST
Operation
Sudden contact of the guidebar nose with a foreign object may generate
kickback.
Remove and/or avoid any obstructions (plumbing, water supply hoses,
electrical conduit, air ducts, etc.) that may interfere with the cut.
Cutting into live electrical wires can cause electrocution
Check for live electrical wires that may be hidden within or behind walls and/or laying
around the workspace. Assure that any ancillary electrical equipment (fans, pumps,
vacuums, generators, etc.) are properly grounded and certified for use in the intended
environment.
Improper or inadequate ground can expose the operator to dangerous voltages.
Ensure your power source is properly grounded. If using a portable generator, ensure it
is grounded with a direct connection to the earth, such as a grounding rod. For specific
information on your generator, refer to the manufacturer’s operator manual.
Always operate the power cutter with solid footing and both hands on the
power cutter.
Keep your left hand on the front handle and your right hand on the rear handle. Wrap
your thumbs around the handles to assure you maintain a secure grip on both handles.
Always wear protective clothing.
At a minimum always wear eye protection and/or face shield, hearing protection, long
sleeve shirt, long pants, closed toe shoes with non-slip soles, and gloves. In many work
situations, a hard hat, steel toed shoes and a respirator may also be required. Avoid
loose fitting clothing. Follow all local regulations regarding PPE.
Cutting with the power cutter may generate sparks, especially when
cutting through metal (such as rebar), and may start a fire in combustible
materials such as dry grass, wood and fuel.
Be sure to use adequate water pressure and have fire fighting equipment
readily available.
Be sure that no part of the cutting system is contacting a solid object when
starting the power cutter.
The power cutter may react unexpectedly if the chain contacts a solid object.
WARNING
