© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
39
Technical Specfications
TECHNICAL SPECIFICATIONS
Input Voltage
220 - 240 VAC, 60
Hz
Rated Current
16 A
No load speed
8500
RPM
Weight w/o bar and chain
23.5
lb/
10.6
kg
Length
24" (61 cm)
Height
10.5" (26.5 cm)
Width
9" (23 cm)
Vibration* A
hv,eq
Concrete Cutting
Front Handle: 1.45 m/s
2
Rear Handle:
2.98
m/s
2
K =
1.5 m/s
2
Guaranteed Sound Pressure Level L
wa
96.9 dB(A)
(K=3dB (A))
Guaranteed Sound Power Level L
wa
107.9 dB(A)
(K=3dB (A))
Recommended Min Generator
5 kVA
Max Water Temp
1
04
0
F/40
0
C
Max Water Pressure
80 psi
/ 5.5 bar
Min Water Pressure
20 psi
/
1.4 bar
Min Water Flow Rate
2 gpm
/
8 lpm
Max Power Output
3.6
kW / 4.8
Hp
If service of your power cutter is required,
contact ICS for instruction: 800.321.1240.
Recommended Extension Cord Size
0 - 50 ft
/ 0 - 15m
12 AWG
/
4
mm
2
50 - 100 ft
/ 15 - 30m
10 AWG
/
4
mm
2
100 - 200 ft
/ 30 - 60m
8 AWG
/
4
mm
2
*Declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another. Declared vibration total value may also be used in a preliminary assessment of
exposure.
WARNING: vibration emission during actual use can differ from declared value depending on the ways in which the
tool is used. Identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
