© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
19
BOX CONTENTS
Unpacking & Assembly
GUIDEBAR AND DIAMOND CHAIN
INSTALLATION & TENSIONING
Following are the basic instructions for guidebar and diamond chain
installation and tensioning.
Never perform any maintenance or adjustments on the power cutter while
connected to a power source.
Improper chain tension can lead to failure of the chain or derailing of the chain off
of the guidebar.
Check tension frequently and adjust if drive links of chain hang 3/4 in (18 mm) or more
below the guidebar groove.
Always wear gloves when handling the bar and chain.
These components can develop sharp edges and cause cuts.
WARNING
CAUTION
536-E
OPERATOR MANUAL
WARNING: READ AND UNDERSTAND ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS BEFORE YOU USE THIS EQUIPMENT.
Failure to follow the warnings and instructions may result in fire, serious injury, or death.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
Powerhead
some boxes also contain:
guidebar and diamond chain
Safety Glasses
Earplugs
Warranty
Registration
Operator Manual
17 mm
13 mm
flathead
screwdriver
Scrench
