ICS ELECTRONICS 9099, Instruction Manual

Page: 67 / 178

3-21
3
TAbLE 3-3 SCPI COMMANDS AND QUERIES
Keyword Default Description
Value
SYSTem - Starts System Command Branch.
:COMMunicate - Identifies communication subsystem commands
:SERial Identifies Serial Interface settings
:BAUD 9600 Sets serial baud rate. Values for the 9099 are 1200
to 115200 baud. See 1.9.2.
:PARity NONE Sets serial parity. Values = EVEN, ODD or
NONE.
:BITS 8 Sets number of data bits per character. Values=
7 | 8.
:SBITs 1 Sets minimum number of stop bits between
characters. Value = 1 | 2.
RS485 OFF Tristates 9099 transmitter when not transmitting
for two wire networks. Values are ON to enable
tristating and OFF for transmitter held in mark
state.
:RAW - Identifies Raw Socket settings
:PORT 23 Sets port number. Value range is 0 to 65,535.
Default is 23.
:ECHO OFF Enables echo of raw socket data. Value is 1(On)
| 0(Off) .
:GPIB - Identifies GPIB interface settings
:ADDRess 4 Sets GPIB Primary address for the 9009. Values
are 0-30.
:USB - Identifies USB interface settings.
:ECHO OFF Enables echo of mesage characters on the USB
port. Value is 1(On)| 0(Off).