ICP DAS, ZT-2570/ZT-2571 User Manual, Version 1.3
Page 17
Copyright @ 2013 by ICP DAS Co., Ltd. All Rights Reserved.
b.
Addressable Mode
is an advanced application mode and it is used to
send data to specific ZigBee nodes. It is not only used to transmit data to
specific ZigBee slaves from host but also transmit data between ZigBee
slaves. A 5-byte ASCII code should be added as an index before the data.
Module
Frame Type
Note
ZT-2570
ZT-2571
Unicast
Data will be sent to a specific ZigBee slave.
Format:
“
:AAAA
”
+ Data
[Eg1]
When ZT-257
0 ZigBee Host sends “:0001DATA_01” via un
icast frame,
→
Only the ZigBee Slave 0x0001 receives DATA_01.
※
Unicast type frame, data will be only sent to the specific ZigBee node)
[Eg2]
When ZigBee slave 0x0001 sends “:0002DATA_02” via unicast frame,
→
Only the ZigBee Slave 0x0002 receives DATA_02.
※
Unicast type frame, data will be only sent to the specific ZigBee node
※
There is an “Advanced Settings” for some specific user
s, please refer the section
7.
3 ”Non
-
addressable Device Communication”
for more information.
ZC_0000
ZS_0001
DATA_02
ZS_0002
DATA_01
：
0001
DATA_01
DATA_03
Addressable
Transparent
Addressable
：
0002
DATA_02
DATA_03
DATA_04
DATA_04
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
