ICP DAS, ZT-2570/ZT-2571 User Manual, Version 1.3
Page 19
Copyright @ 2013 by ICP DAS Co., Ltd. All Rights Reserved.
4.2
Connecting the Power and Host PC
Step 1.
Confirm that the DIP switch is set to the “ZBSET” position.
Step 2.
Connect the DC.GND and DC.+Vs pins with 10 to 30V power supply.
SAFTY INSTRUCTION NOTES
Before connecting the power source to the power input pins, ensure that
both the installation of the unit in the completed system, and the DC
power source (SELV, Limited Power Source) that is intended to be
connected to the power input pins (DC.+Vs / DC.GND) comply with the
requirements of EN 60950-1.
DC.GND
DC.+Vs
F.G.
D-
D+
GND
+VS
ZBSET/ZBRUN/ZBINIT
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
