PISO-CPM100(U) / PCM-CPM100 user manual (ver. 2.02) Dec/03/2012 ----------------- 50
4.5.16.
CPM100_RemoveAndResetNode
Description:
The function CPM100_RemoveAndResetNode removes the slave
with the specified Node-ID from node list of the master and reset the
slave. It requires a valid Node-ID, which has installed by the function
CPM100_AddNode before.
Syntax:
WORD
CPM100_RemoveAndResetNode (
BYTE
BoardNo,
BYTE
Node,
BYTE
BlockMode)
Parameter:
BoardNo:
[input] CPM100 board number (0~7).
Node:
[input] Slave device Node-ID (1~127).
BlockMode:
[input] 0 means this function is non-block-function, and 1
means this function is block-function. If set this parameter to 1, the
running procedure of the users’ application will be held in the
function until return. If set to 0, this function will return “CPM_
Processing” directly. This function will return its process status
while users apply it with the same “BoardNo” and “Node” again. If
the procedure is still not complete, it will return “CPM_Wait”.
