ICP DAS USA I-8017 Series User Manual Download Page 49

Page: 49 / 93

I-8017/I-9017 Series I/O Module User Manual

V3.0.3

P.49

3.7.

i8017H_ReadAI_AVG / pac_i8017HW_ReadAI_AVG

This function is used to read the average Analog Input value in float format from the module.

Syntax

For MiniOS7

short i8017HW_ReadAI_AVG(int slot,int iChannel,int iGain,unsigned short averageCnt,
float* fValue);

For Windows (CE and WES)

short pac_i8017HW_ReadAI_AVG(int slot,int iChannel,int iGain,unsigned short averageCnt,
float* fValue);

For Linux

short I8017_ReadAI_AVG(int slot, int iChannel, int iGain, unsigned short averageCnt, float*
fValue);

// for LinPAC-8000

short I9017_ReadAI_AVG(int slot, int iChannel, int iGain, unsigned short averageCnt, float*
fValue);

// for LinPAC-9000, LX-9000

Summary of Contents for I-8017 Series






























































































Search results

Summary of Contents for I-8017 Series

Reviews:

Related manuals for I-8017 Series

Brands by name

Popular brands

ICP DAS USA I-8017 Series, User Manual

Search results

Summary of Contents for I-8017 Series

Reviews:

Related manuals for I-8017 Series

Brands by name

Popular brands