ICP DAS USA I-8017 Series User Manual Download Page 64

Page: 64 / 93

I-8017/I-9017 Series I/O Module User Manual

V3.0.3

P.64

3.11.

i8017H_Read_mA_GainOffset / pac_i8017HW_Read_mA_GainOffset

This function is used to read the calibrated Gain and Offset values for the I-9017/I-9017C-15

module inserted in a specific slot.

Syntax

For MiniOS7

short i8017H_Read_mA_GainOffset(
int slot, short ch, unsigned short* GainValue, short* offsetValue
);

For Windows (CE and WES)

short pac_i8017H_Read_mA_GainOffset(
int slot, short ch, unsigned short* GainValue, short* offsetValue
);

For Linux

short I8017_Read_mA_GainOffset(

int slot, short ch, unsigned short* GainValue, short* offsetValue);

// for LinPAC-8000

short I9017_Read_mA_GainOffset(

int slot, short ch, unsigned short* GainValue, short* offsetValue);

//for LP-9000, LX-9000

Summary of Contents for I-8017 Series






























































































Search results

Summary of Contents for I-8017 Series

Reviews:

Related manuals for I-8017 Series

Brands by name

Popular brands

ICP DAS USA I-8017 Series, User Manual

Search results

Summary of Contents for I-8017 Series

Reviews:

Related manuals for I-8017 Series

Brands by name

Popular brands