ICP DAS USA I-8017 Series, User Manual

Page: 32 / 93

I-8017/I-9017 Series I/O Module User Manual V3.0.3 P.32
2.3. Linux-based Controllers
Basic function can be used to retrieve configuration information and verify the AI reading function.
Basic information includes:

Version number and published date of the library.

FPGA version.

Single-ended/Differential jumper settings.

Gain and offset values for each input range.

Data reading of each channel.
Please follow the steps below to learn how to use I-8017HW series modules.
Step 1: Users need to download LinPAC SDK, which is includes GNU tool chain, Libraries, header,
examples files, etc.
Step 2: Check the power cable, Ethernet cable, VGA monitor, the communication cable between
controller and PC has been connected well, and then check the i-8017W/9017 has been
plugged in the controller.
Step 3: Refer to the Jumper Settings section. Ensure that the Differential/Single-ended selection
jumper is in the Differential position. Connect a stable signal source to the module (e.g., a
battery output) using the differential wiring method.
Step 4: Next, check the communication between controller and PC is fine or not, and download
the demo program files to the controller.
PRRODUCT CPU DOWNLOAD LINK
LP-8x4x PXA270 https://www.icpdas.com/en/download/show.php?num=982
LP-8x2x/9000 AM335x https://www.icpdas.com/en/download/show.php?num=915
LX-8000/9000 x86/E38xx http://www.icpdas.com/en/download/show.php?num=904