ICP DAS USA I-7565M-FD, Service And Usage Information

Page: 10 / 83

I-7565M-FD USB to CAN/CAN FD converter User Manual (version 1.0.0) Page: 10
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
2.4. LED Indicator
There are 6 LEDs on the I-7565M-FD. One for power indication, one for hardware
status indication and four for CAN Bus indication. The LED assignment and
description are shown as follows.
Figure 2-3 LED Assignment of I-7565M-FD
Table 2-2 LED Description
LED Name Color Description
Power Red Power status of USB port
MS Red
Module status.
OFF: no error
ON: hardware malfunction
CAN1_ST Red
CAN Bus status.
OFF: no error
ON: CAN1 Bus Off
Flash: CAN1 Bus error or data overrun
CAN2_ST Red
CAN Bus status.
OFF: no error
ON: CAN2 Bus Off
Flash: CAN2 Bus error or data overrun
CAN1 Green
OFF: no messages on CAN1 port
Flash: Transmit/Receive messages on CAN1 port
CAN2 Green
OFF: no messages on CAN2 port
Flash: Transmit/Receive messages on CAN2 port
NOTE:
In “Firmware Upgrade Mode”:
These LEDs of “Power”, “MS”, “CAN1_ST”, “CAN2_ST”, “CAN2”, “CAN1” would flash in
the clockwise direction.