ICP DAS USA I-7565M-FD, Service And Usage Information

Page: 24 / 83

I-7565M-FD USB to CAN/CAN FD converter User Manual (version 1.0.0) Page: 24
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Figure 4-5 “Send Message” screen of the I-7565-FD Utility
[Send Message] block:
<1> “ Send Message Configuration ” frame :
It is used to edit the CAN message parameters and users can use “Add” button
to add the CAN message to “CAN/CAN FD Message Send Area”.

Mode : CAN 11-bit (standard) ID or 29-bit (extended) ID.

ID : CAN ID field of CAN/CAN FD frame.

RTR : Remote frame. Value 0 means this frame is a data frame. Value 1
means this frame is a remote frame

FDF : CAN FD frame. Value 0 means this frame is a CAN frame. Value 1
means this frame is a CAN FD frame

DL : CAN message data length.
For CAN frames, this field can be set 0 ~ 8 (means 0 ~ 8 bytes data
length).
For CAN FD frames, this field can be set 0 ~ 8,
12/16/20/24/32/48/64 (means 0 ~ 8, 12/16/20/24/32/48/64 bytes
data length).

Data : Data field of CAN messages. Each data must split with ‘-’.

Timer(ms) : Transmission cycle of the CAN message.
Unit: 1 millisecond.
<2> “ Add ” button :
It will add the CAN message from “Send Message Configuration” area to the
last row in “CAN/CAN FD Message Send Area”.
<3>
“ Modify ” button :
It will modify the CAN message parameter from “Send Message Configuration”
area to the assigned blue row in “CAN/CAN FD Message Send Area”.