ICP DAS USA FSM-510G series Manual Download

Page: 82 / 298

Target IP Filter

Specify the target IP filter for this specific ACE.

Any

: No target IP filter is specified. (Target IP filter is "don't-care".)

Host

: Target IP filter is set to Host. Specify the target IP address in the Target IP

Address field that appears.

Network

: Target IP filter is set to Network. Specify the

target IP address and target IP mask in the Target IP Address and Target IP Mask

fields that appear.

Target IP Address

When "Host" or "Network" is selected for the target IP filter, you can enter a specific

target IP address in

dotted decimal notation

Target IP Mask

When "Network" is selected for the target IP filter, you can enter a specific target IP

mask in

dotted decimal notation

ARP Sender MAC Match

Specify whether frames can hit the action according to their sender hardware address

field (SHA) settings.

: ARP frames where SHA is not equal to the SMAC address.

: ARP frames where SHA is equal to the SMAC address.

Any

: Any value is allowed ("don't-care").

RARP Target MAC Match

Specify whether frames can hit the action according to their target hardware address

field (THA) settings.

: RARP frames where THA is not equal to the target MAC address.

: RARP frames where THA is equal to the target MAC address.

Any

: Any value is allowed ("don't-care").

IP/Ethernet Length

Specify whether frames can hit the action according to their ARP/RARP hardware

address length (HLN) and protocol address length (PLN) settings.

: ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the (PLN) is

not equal to IPv4 (0x04).

: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is

equal to IPv4 (0x04).

Any

: Any value is allowed ("don't-care").

Specify whether frames can hit the action according to their ARP/RARP hardware

address space (HRD) settings.

: ARP/RARP frames where the HLD is not equal to Ethernet (1).

: ARP/RARP frames where the HLD is equal to Ethernet (1).

Any

: Any value is allowed ("don't-care").

Ethernet

Specify whether frames can hit the action according to their ARP/RARP protocol

address space (PRO) settings.

: ARP/RARP frames where the PRO is not equal to IP (0x800).

: ARP/RARP frames where the PRO is equal to IP (0x800).

Any

: Any value is allowed ("don't-care").

Summary of Contents for FSM-510G series











































































































































































































































































































Search results

Summary of Contents for FSM-510G series

Reviews:

Related manuals for FSM-510G series

Brands by name

Popular brands

ICP DAS USA FSM-510G series, Manual

Search results

Summary of Contents for FSM-510G series

Reviews:

Related manuals for FSM-510G series

Brands by name

Popular brands