ICP DAS USA FSM-510G series Manual Download Page 231

Page: 231 / 298

Command Descriptions

231

Disabled: The server is disabled.

Not Ready: The server is enabled, but IP communication is not yet up and running.

Ready: The server is enabled, IP communication is up and running, and the RADIUS

module is ready to accept accounting attempts.

Dead (X seconds left): Accounting attempts were made to this server, but it did not

reply within the configured timeout. The server has temporarily been disabled, but will

get re-enabled when the dead-time expires. The number of seconds left before this

occurs is displayed in parentheses. This state is only reachable when more than one

server is enabled.

Buttons

Check this box to refresh the page automatically. Automatic refresh occurs every 3

seconds.

Click to refresh the page immediately.

Summary of Contents for FSM-510G series











































































































































































































































































































Search results

Summary of Contents for FSM-510G series

Reviews:

Brands by name

Popular brands

ICP DAS USA FSM-510G series, Manual

Search results

Summary of Contents for FSM-510G series

Reviews:

Brands by name

Popular brands