ICP DAS USA FSM-510G series Manual Download

Page: 87 / 298

Command Descriptions

Any

: Any value is allowed ("don't-care").

TCP URG

Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.

: TCP frames where the URG field is set must not be able to match this entry.

: TCP frames where the URG field is set must be able to match this entry.

Any

: Any value is allowed ("don't-care").

Ethernet Type Parameters

EtherType Filter

Specify the Ethernet type filter for this ACE.

Any

: No EtherType filter is specified (EtherType filter status is "don't-care").

Specific

: If you want to filter a specific EtherType filter with this ACE, you can enter

a specific EtherType value. A field for entering a EtherType value appears.

Ethernet Type Value

When "Specific" is selected for the EtherType filter, you can enter a specific EtherType

value. The allowed range is

0x600

0xFFFF

but excluding 0x800(IPv4),

0x806(ARP) and 0x86DD(IPv6). A frame that hits this ACE matches this EtherType

value.

Buttons

Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

Return to the previous page.

Summary of Contents for FSM-510G series











































































































































































































































































































Search results

Summary of Contents for FSM-510G series

Reviews:

Related manuals for FSM-510G series

Brands by name

Popular brands

ICP DAS USA FSM-510G series, Manual

Search results

Summary of Contents for FSM-510G series

Reviews:

Related manuals for FSM-510G series

Brands by name

Popular brands