ICP DAS USA FSM-510G series Manual Download Page 286

Page: 286 / 298

286

2.5.2 Ping6

Object

Description

IP Address

The destination IP Address.

Ping Length

The payload size of the ICMP packet. Values range from 2 bytes to 1452 bytes.

Ping Count

The count of the ICMP packet. Values range from 1 time to 60 times.

Ping Interval

The interval of the ICMP packet. Values range from 0 second to 30 seconds.

Egress Interface

(only for IPv6)

The VLAN ID (VID) of the specific egress IPv6 interface which ICMP packet goes.

The given VID ranges from 1 to 4094 and will be effective only when the

corresponding IPv6 interface is valid.

When the egress interface is not given, PING6 finds the best match interface for

destination.

Do not specify egress interface for loopback address.

Summary of Contents for FSM-510G series











































































































































































































































































































Search results

Summary of Contents for FSM-510G series

Reviews:

Brands by name

Popular brands

ICP DAS USA FSM-510G series, Manual

Search results

Summary of Contents for FSM-510G series

Reviews:

Brands by name

Popular brands