ICP DAS USA FSM-510G series, Manual

Page: 129 / 298

Command Descriptions
129
2.3.77 VLAN Configuration
Object Description
Delete Check to delete the entry. The designated entry will be deleted during the next save.
VLAN ID The VLAN ID of the entry.
MLD Snooping Enabled Enable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for MLD
Snooping.
Querier Election Enable to join MLD Querier election in the VLAN. Disable to act as a MLD
Non-Querier.
Compatibility Compatibility is maintained by hosts and routers taking appropriate actions depending
on the versions of MLD operating on hosts and routers within a network.
The allowed selection is
MLD-Auto
,
Forced MLDv1
,
Forced MLDv2
, default
compatibility value is MLD-Auto.
PRI Priority of Interface.
It indicates the MLD control frame priority level generated by the system. These
values can be used to prioritize different classes of traffic.
The allowed range is
0
(best effort) to
7
(highest), default interface priority value is 0.
RV Robustness Variable.
The Robustness Variable allows tuning for the expected packet loss on a link.
The allowed range is
1
to
255
, default robustness variable value is 2.
QI Query Interval.
The Query Interval is the interval between General Queries sent by the Querier.
The allowed range is
1
to
31744
seconds, default query interval is 125 seconds.
QRI Query Response Interval.
The Maximum Response Delay used to calculate the Maximum Response Code
inserted into the periodic General Queries.
The allowed range is
0
to
31744
in tenths of seconds, default query response interval
is 100 in tenths of seconds (10 seconds).
LLQI Last Listener Query Interval.