ICP DAS USA FSM-510G series, Manual

Page: 124 / 298

124
2.3.73 VLAN Configuration
Object Description
Delete Check to delete the entry. The designated entry will be deleted during the next save.
VLAN ID The VLAN ID of the entry.
IGMP Snooping Enabled Enable the per-VLAN IGMP Snooping. Up to 32 VLANs can be selected for IGMP
Snooping.
Querier Election Enable to join IGMP Querier election in the VLAN. Disable to act as an IGMP
Non-Querier.
Querier Address Define the IPv4 address as source address used in IP header for IGMP Querier
election .
When the Querier address is not set, system uses IPv4 management address of the
IP interface associated with this VLAN.
When the IPv4 management address is not set, system uses the first available IPv4
management address.
Otherwise, system uses a pre-defined value. By default, this value will be 192.0.2.1.
Compatibility Compatibility is maintained by hosts and routers taking appropriate actions depending
on the versions of IGMP operating on hosts and routers within a network.
The allowed selection is
IGMP-Auto
,
Forced IGMPv1
,
Forced IGMPv2
,
Forced
IGMPv3
, default compatibility value is IGMP-Auto.
PRI Priority of Interface.
It indicates the IGMP control frame priority level generated by the system. These
values can be used to prioritize different classes of traffic.
The allowed range is
0
(best effort) to
7
(highest), default interface priority value is 0.
RV Robustness Variable.
The Robustness Variable allows tuning for the expected packet loss on a network.
The allowed range is
1
to
255
, default robustness variable value is 2.
QI Query Interval.