ICP DAS USA FSM-510G series Manual Download Page 32

Page: 32 / 298

2.3.15 DHCP Snooping

Object

Description

Snooping Mode

Indicates the DHCP snooping mode operation. Possible modes are:

Enabled

: Enable DHCP snooping mode operation. When DHCP snooping mode

operation is enabled, the DHCP request messages will be forwarded to trusted ports

and only allow reply packets from trusted ports.

Disabled

: Disable DHCP snooping mode operation.

Port Mode Configuration

Indicates the DHCP snooping port mode. Possible port modes are:

Trusted

: Configures the port as trusted source of the DHCP messages.

Untrusted

: Configures the port as untrusted source of the DHCP messages.

Buttons

Summary of Contents for FSM-510G series











































































































































































































































































































Search results

Summary of Contents for FSM-510G series

Reviews:

Brands by name

Popular brands

ICP DAS USA FSM-510G series, Manual

Search results

Summary of Contents for FSM-510G series

Reviews:

Brands by name

Popular brands