ICP DAS USA FSM-510G series, Manual

Page: 261 / 298

Command Descriptions
261
2.4.65 IPv6 SFM Information
Each page shows up to 99 entries from the MLD SFM Information table, default being 20, selected
through the "entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the MLD SFM Information Table.
The "Start from VLAN ", and "group" input fields allow the user to select the starting point in the MLD
SFM Information Table. Clicking the button will update the displayed table starting from
that or the closest next MLD SFM Information Table match. In addition, the two input fields will - upon a
button click - assume the value of the first displayed entry, allowing for continuous refresh
with the same start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the button to
start over.
Object Description
VLAN ID VLAN ID of the group.
Group Group address of the group displayed.
Port Switch port number.
Mode Indicates the filtering mode maintained per (VLAN ID, port number, Group Address)
basis. It can be either Include or Exclude.
Source Address IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
Type Indicates the Type. It can be either Allow or Deny.
Hardware Filter/Switch Indicates whether data plane destined to the specific group address from the source
IPv6 address could be handled by chip or not.
Buttons
Check this box to refresh the page automatically. Automatic refresh occurs every 3